tea.glass · sampling channel Encyclopedia · School · Atlas · Pu-erh · Equipment EN · RU · · · FR · ES · AR
tea.glass Cart (0)
柳州 120ml 棱紋蓋碗
dry
wet
liquor
plantation

home · gaiwans

Gaiwans — 盖碗

柳州 120ml 棱紋蓋碗

Liǔzhōu Léngwén Gài Wǎn

柳州棱纹盖碗

一只120毫升手工吹製玻璃蓋碗,擁有十二道垂直棱紋——杯壁的棱紋能輕柔地扣住蓋子,發出輕微的喀嗒聲。

$95USD · 130 g

Weight
130 g
Harvest
Spring 2026
Processing
Hand-blown borosilicate, mold-flute formed, fire-polished rim, slow-annealed overnight
Sourced by

每月十二只,在柳州的庭院中

Gao Lihua 獨自在廣西柳州,柳江後方兩條街的一間改建地面層工作室中工作。她現年六十一歲。她於1980年代在北海玻璃合作社接受培訓,於1996年離開,並在過去十四年間以自己名義吹製單件作品。她刻意將產量維持在極小規模——每月十二件具名蓋碗,每件均以紙本登記簿記錄日期、買家,以及關於該作品在吹管上表現的一句註記。

Michael Zhan 每季在他的廣西路線中拜訪她的工作室。他主要採購雲南和福建的茶葉,但玻璃器皿則是個人繞道之旅——他於2022年經由一位柳州普洱茶商找到Gao,並自第二批起便為 tea.glass 採購她的蓋碗。

棱紋造型是她自創的。她將初型吹入一個十二肋的石墨模具中,然後在滾料板上手工開擴杯口。棱紋具有功能性——它們讓蓋子定位準確,能以輕微的喀嗒聲嵌入,而非滑動,當你拇指濕滑且茶碗滿斟時,這一點尤為重要。

杯壁厚度在1.6至2.1毫米之間。容量以注水對比標記量杯進行確認,然後以Gao的筆跡蝕刻在足底。Michael於2026年三月選定的那一批共二十四件,橫跨兩次燒製——第二次燒製溫度稍高,杯口拉得更細膩一些。

The leaf, brewed

Not a tea — but here's how it behaves in the hand

dry leaf

Glass reads cool but not icy, faintly green at the rim where wall thickness drops to 1.6mm.

wet leaf

After a rinse the flutes hold a thin film of condensate that beads downward in even tracks.

liquor

Liquor reads honest — no green tint, no optical distortion across the 75mm bowl diameter.

aroma

Aroma lifts cleanly because borosilicate carries no glaze memory; first pour smells like the tea, not the vessel.

taste

Heat retention is moderate — wall is thinner than ceramic, so the second steep wants five extra seconds to compensate.

finish

Lid drops into the ribbed register with a small tick. No grinding, no slip on a wet thumb.

Brewing

A method, not a recipe.

Method
gongfu
Ratio
1g per 15ml (≈8g for full 120ml)
Water temp
85–100°C depending on tea
First infusion
10s after a 5s rinse
Subsequent
8–12 steeps, adding 5s per round after the fourth

以滾水溫杯三十秒——玻璃比瓷器散熱更快,尤其在冬季。

Sourced by

Michael Zhan

採購與供應專員(中國)

Full profile →